Eat Butt patch 3 inch width with iron on adhesive
Iron on patch instructions using an Iron:
Step 1: Set your hand iron at the hottest temperature setting. DO NOT USE STEAM DURING APPLICATION!
Step 2: Place your patch in the desired position and place a pressing cloth ( handkerchief, sheet or pillowcase fabric) over top.
Step 3: Press the iron straight down for 35-45 seconds with as much constant pressure as possible. NO BACK AND FORTH.
Step 4: Turn the garment inside-out and repeat steps 2 & 3.
Step 5: Allow the patch to cool down.
Best on polyester/cotton fabrics. Other fabric results may very. Do not apply to rainwear (waterproof), highly elastic, rayon, nylon or tri-acetate fabrics. Once applied properly, patch is permanently attached to garment and is washable, dryable and dry cleanable. For machine washing, turn garment inside-out before washing and drying.
Please check your own garments care instructions before placing an iron to garment.... Thunderpuss is not held responsible for damaged clothing or body parts due to improper use of an iron.